[ad_1]
As a translator between your host name and your IP address, the Domain Naming System (DNS) is your portal for safe and convenient surfing. If you happen to come across the blasted words “DNS server not responding” it can cause inconvenience as your device won’t connect to the internet. Don’t fret because the solution (s) are below.
Solutions to Solving DNS Server Not Responding Problem
While you may be pondering why you are facing the forbidden “DNS Server Not Responding” message, the pathologies are largely on your end . Hardware problems, browser impotence, router inadequacies – the reasons are diverse.
You have to keep in mind that some of the methods mentioned may involve reasonable risks, e.g. B. the dampening of your router. You need to be very careful about the methods mentioned and the risks they can carry and act accordingly. While it is safer to do this with professional help, the following methods are pretty solid methods of overcoming the DNS server not responding issue:
Fixing DNS Server not responding “using the old method – restart the router
You want to eliminate the first chance of the DNS server not responding problem by first checking your hardware. Pressing your router to restart should solve the problem. Before diving into the other differences, you need to make sure that the most basic and logical reasons are covered.
Since we’re giving the obvious, you should look for an on / off switch on your router. Turn your router on / off once. Any router problems can be resolved by restarting the hardware. If your router doesn’t have a button, you can unplug it and restart it from there.
There may also be a complicated problem with your router configuration. This could be the reason your DNS server is not responding. To fix this, you need to open your router’s configuration webpage. From there, try to find the “Reset” option. If you still get the “DNS server not responding” message, you can try using one of the last resort when it comes to hardware fixes.
The other solution is to reset the router to factory settings. This only requires a long press of the reset / power button. The duration of this action can vary between 10 and 15 seconds or so. You have to keep in mind that the factory reset option cleans up or clears security measures like passwords. You need to reassign the same.
Resolving “DNS server not responding” in Safe Mode
As a kind of diagnostic test, Windows Safe Mode is always an option when abnormal behavior occurs. Once you determine that the router is not the cause of the problem, you can start your system in Safe Mode. Basically, your system will run in the most basic of formats so you can see what exactly is causing the DNS server to stop responding. In Safe Mode, you will typically limit files and resources that are using your system’s power resources so that you can determine exactly what the problem might be.
There are several ways to access Windows in Safe Mode. You can switch to the power icon. While long-clicking the Power button, also hold down the Shift key and restart your computer. If you are using Windows 7 or earlier, you will need to go to “Power” and click “Restart”. Then you have to hold down the F8 key.
To resolve the DNS server not responding issue, start with Safe Mode and see where the inconsistencies are. For example, the problem could be with third-party software that could plague the DNS. With this in mind, be sure to check the network or security apps in particular, as these are usually the best known. In other cases, your system should operate in Safe Mode if there is no problem. This is mostly diagnostic, to say the least.
Driver update against “DNS server not responding”
You should also look for drivers, as they are known to prevent DNS servers from responding. This is especially the case where you haven’t updated the same thing. The catch-22 situation here, however, is something completely different: unironically, you need a stable internet to download or purchase the latest version yourself.
The other workaround is to purchase third-party solutions that allow you to update drivers offline. Use caution here with measures such as compatible operating system versions (for example, some run exclusively on Windows 10, while others are optimized for Windows Vista).
After downloading the version you think is appropriate, you need to restart your system and check if you still get the same “DNS server not responding” message.
You can also update drivers manually, but here too you need access to the Internet. You need to go to the network adapter manufacturer’s website and download a copy of the latest (or compatible) drivers on your external drive or USB device.
Once you’ve put this into your problematic system, you’ll be asked which one to install. Obviously, choose the one that doesn’t require you to connect to the internet. After installing the version that you think is appropriate, you will need to restart.
Deactivating antivirus could be the solution to the message “DNS server is not responding”.
Yes, you read it right. While your antivirus software is meant to mitigate problems and fix security loopholes in your system, it may also be key to fixing the DNS server not responding problem.
Sure, it may not sound like intuitive, but temporarily disabling it may just be the key to solving the problem in the long term. If you are unfamiliar with the idea of exposing your system to the unfiltered environment (and understandably so), you can try switching to a different antivirus solution and see if it works.
To be honest, your Windows Defender does a good job of keeping such items at bay. Anything that is additional is merely an addition (which is good).
The P2P function in Windows systems is a new attribute. Essentially, it lets you get updates on one system and forward them to others on the network. This saves both bandwidth and (of course) time.
The problem is that P2P is starting to express imperfections on the Internet. This is why the “DNS server is not responding” message does not disappear. The solution to this is quite simple, but it requires a lot more clicks than expected.
You need to go to your settings panel followed by “Update and Security”. From here, find the option for “Advanced Options” and turn off the “Allow downloading from other PCs” features. Then try to connect to the internet and see if the “DNS server not responding” problem persists or not.
Changing the Server to Solve the DNS Server Not Responding Problem
For the more advanced steps, you will need to attack the server directly. In this case, if you suspect errors in the DNS itself, then you need to consider a complete change. Fortunately, Google has you covered. Google has a public DNS that you can use, albeit manually. However, you have to do this manually.
Go to your start menu and right click to access “Network Connections”. Here select “Properties” from the drop-down menu. You need to select “Internet Protocol Version 4” and then click on “Properties”.
Then you have to click on “Use the following DNS addresses”. Then you have to enter 8.8.8.8 as “preferred DNS server” and 8.8.4.4 as “alternative DNS server”. Click OK to save the changes above. This is to help you resolve the DNS server not responding problem.
Disable IPv6 to resolve the DNS server not responding issue.
Internet Protocols (IP) is a communication protocol that defines the location configurations of your systems in networks. It basically directs, manages and forwards internet traffic. IPv6 is the latest version of this internet protocol. In this case you have to disable IPv6 if the DNS server does not respond.
Deactivating is the easiest part, however. You need to access your system through the Network and Sharing Center. Visit your control panel and click on “View network status and tasks” under “Network and Internet”. Then click on your connection.
In the properties above, you need to find “Internet Protocol Version 6 (IPv6)” and uncheck the box to uncheck it. You can then click “OK” to save the changes. This is to help you troubleshoot and understand why your DNS server was not responding.
Entering the MAC Address Manually
Possibly the longest step of all, the first thing you need to do is understand what a media control address (MAC address) is. A device’s MAC address is a unique identifier that networks use as communication links. These are essentially assigned by the network interface controller manager. This is also stored in the system’s RAM or through other various firmware mechanisms.
To resolve the DNS server not responding issue, you must enter your MAC address manually. But before that, you’ll need to search and find it using other prompts. In either case, prompts are essentially line interpreter applications available on Windows platforms. They are generally used for very complicated tasks, ranging from finding files to performing more advanced tasks, such as: B. for troubleshooting and performing administrative functions.
To use this prompt, you must enter valid commands with their associated metrics or parameters. In this case, however, you will need to use the aforementioned administrator rights to access a specific “Elevated Command Prompt”. To open the same thing, go to “Search”, type “Command Prompt” and right click on the “Command Prompt” result. You must now select “Run as administrator” to run it with the benefits mentioned.
You will then be asked whether you allow the command prompt to make changes to your system. You have to confirm this by clicking “Yes”. You will now see the prompt for elevated commands. This is where the job gets a little trickier.
Type “ipconfig / all” and press Enter. You can see a lot of information about the configuration. Access Physical Address and write it down somewhere. You will see a list of information about this configuration. You need to find “Physical Address” and annotate it elsewhere as you will need it later.
Now select the activated connection type (Ethernet, Wi-Fi, etc.) in your “Network and Internet Settings” window. You’ll need to find and click Change Adapter Options, then go to Properties. Then simply click on “Configure”.
Go to the “Advanced” tab and select “Network Address” under “Properties”. Select “Value” in the right pane. After that, you need to enter your MAC address. This happens to be the physical address you wrote down some time ago.
Click OK here to save your changes and see if your DNS server is still not responding. Hopefully this should be one of the ultimate solutions.
Logical Diagnostics – Connect to Other Devices
One of the most logical ways to diagnose whether the problem is inherent or systemic is to use other devices. Get another device and see if it connects to the same connection or not. The reason we mentioned this is because it would be nonsense not to cover all areas when trying to understand why the DNS server is not responding.
At the same time, it is also the simplest solution when it comes to solving the problem in question. For example, suppose the devices are connecting, but you are still having trouble connecting to any website. In this case, try to use your mobile data. If you’re still having problems, the problem is with the website, not your devices per se.
The biggest problems can often be represented with the simplest solutions. If you encounter inconsistencies while connecting to the same router, consider restarting the device that cannot connect. If you still have a problem, you need to use the device more intuitively.
Updating Your Router to Combat DNS Server Not Responding Problem
Sure, turning it on and off can be a way to fix the DNS server not responding. However, if that fails, try to see if your router is missing any updates. Firmware updates are a big deal for routers, especially in this day and age of range enhancement.
However, you need to consider the risks involved. Updating the router can cause permanent and irreversible damage, and you need to be aware of these consequences. If necessary, contact your approachable IT support to solve the problem with minimal risk. Ideally, this should help you resolve the DNS server is not responding problem, if the cause of the problem has been correctly identified.
The message “DNS server is not responding” can also be due to outdated browsers. To work around this you need to update the same thing. All you have to do is use an alternative browser. If the problem actually occurs with the current browser, you should be able to access the Internet using the alternate browser.
For example, Chrome is notorious for draining your RAM and other internals. This can affect the way your system processes signals. While it doesn’t sound like that easy, you should always update to the latest versions. If not for better connectivity, definitely better online security.
After doing this, you need to check for the latest version of the problematic browser which may give you the abandoned message. Make sure you update to the latest offer from the manufacturer yourself and don’t bother using side ports. You should be able to solve the said problem from here.
To conclude
The Internet has become a source of knowledge in modern times. Not being able to access it is not only delirious, but in some cases harmful. In this Internet-ridden world, there is no way you can afford to make mistakes, and “DNS server not responding” can be a pretty annoying thing to face.
The processes mentioned have their own modes of operation and have been explained rather simply for the sake of simplicity. The ideal way would be to diagnose the problem from a logical point of view and then move on to more advanced techniques to work around the problem.
In either case, the above list should suffice and you should soon be past the DNS server not responding to the problem.
[ad_2]
